The furnace is your best friend in winters that keeps your house warm and when it has any problems you call furnace services to handle them. But how will you find out if your furnace needs repair? Here are a few signs that call for furnace repair.

Odd Noises

Every machine makes noise and your HVAC system is not any exception, however, there is a noise of a machine that is working perfectly and then there is an odd noise of squeaking and rattling of loose hardware. Both of them are completely different. If you hear these noises from your furnace, you must immediately call furnace repair services before it becomes a permanent problem.

Furnace Is Not Starting

When a furnace doesn’t start easily or doesn’t start at all, it is a clear red flag and an indication that it needs repair. It has numerous reasons for not starting easily from the furnace age to broken thermostat to damaged wiring. It is hard to pinpoint what the problem might be but a furnace professional can locate and resolve the issue.

Finding Water Around the Furnace

This is another common problem found in furnaces that causes them to not work efficiently by not providing equal or sufficient heat around your house. If you find water pooling around the furnace, it means that the water is leaking from the furnace. This is due to the clogging in the condenser lines. This problem is not very dangerous per se but it requires professionals to repair with a mix of plumbing work too.

The Smell of Gas in Your House or Around Furnace

Other than water, gas is another substance that can get leaked from your furnace. However, this case more dangerous than the water leak and requires an immediate shut down of the furnace. Don’t have anything that has anything to do with fire around the furnace. Open up the furnace and turn the gas valve. Call a furnace service to take a look into the matter and fix the source of the problem.

Not Producing Enough Heat

The one job furnace has to do is to provide an adequate amount of heat around the house that suffice the comfortability of the members. If your furnace is not giving enough heat despite the proper thermostat settings then it is obvious that it needs repair. It is a big sign that the furnace is failing and requires repair. It is due to a number of causes like leak in the vent and ducts, failure in the blower fan and problem in the heat exchanger just to name a few.

The Furnace Is Old

If your furnace has passed its average lifespan of 15 years just like a chimney then it has done its part and now it is time to replace it with a new one. A furnace will constantly require some maintenance work over its lifetime but when it gets over the limit, it requires even more maintenance that adds up to your repair cost but aren’t very efficient despite the repairs. An old furnace may even have more than one problem at a time.

You Haven’t Had a Maintenance of the Furnace in a Long Time

Your furnace needs to be repaired and maintained at least every six months. If you have neglected your furnace repairs in years then it is high time that you start paying attention to it. It will not work properly if it is not repaired.

Heat Bill Is Increased

An increase in heat bill is also an indication that something might be wrong with the furnace. There may be gas leaking through ducts or the furnace is not efficient enough to provide enough energy around the house without using extra energy. Have it repaired so it cut down the costs of your bill.

Pilot Light Warning

A furnace repair service ronkonkoma should immediately be called if you see a change in a pilot light color. Blue light marks that the furnace is working just fine but the yellow indicates the problem in the ventilation and there is also a possibility that carbon monoxide might be leaking which is harmful gas for human health. Shut down the furnace and call a professional for repairs.

Leave a Reply

Your email address will not be published. Required fields are marked *
You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>